TriPlane Linear Redefining LED grow lighting
The TriPlane™ Linear combines high light output and controlled distribution with optimized efficiency and exceptional thermal management. Engineered for multiple mounting configurations and distribution angles, it offers the ideal combination of form and function in any greenhouse or indoor room.
- up to 2313 µmol/s PAR
- up to 3.3 µmol/J efficacy
- 4 spectrum recipes
-
-
- IP66
HO and LO output · Linear or SQ mounting · 0-10V sourcing dim · L90B5 at 50,000 hours
Full compatibility and high performance, combined
The TriPlane Linear pairs high light output and controlled distribution with the efficiency and thermal management of LED, in a modular form that adapts to the footprint of any greenhouse or indoor grow room.
High output, high efficiency
Up to 2313 µmol/s of PAR at up to 3.3 µmol/J, with high-output and low-output modules to match your DLI target.
Linear or SQ mounting
Multiple mounting configurations and distribution angles, so the fixture fits your structure and light plan.
Multiple spectrum recipes
RWMB, Daylight, and far-red recipes, including a dual-channel RWMB+FR option, to match your crop and stage.
Engineered thermal management
Integrated fins dissipate heat through conduction, and the driver sits in a separate aluminum enclosure for maximum airflow and long life.
Mounting configurations
The TriPlane Linear is engineered for multiple mounting configurations:
- Linear: LED modules mount back-to-back or spaced apart, and driver modules mount vertically or horizontally above or between them.
- SQ: LED modules are secured on either side of the driver with a factory-installed mounting plate, for a simple one-step installation.
In either configuration, the LED modules can be field-adjusted independently in precise increments in either direction, for highly customized light distribution.
Engineered for easy retrofit
A standard horticultural power connector and intuitive, toolless mounting brackets allow for an easy plug-and-play retrofit. The ability to daisy-chain both the power and 0-10V control reduces installation cost and complexity.
Engineered thermal management
Integrated fins on top of the aluminum LED modules dissipate heat through conduction for optimal passive thermal management. The integrated driver is housed in an aluminum enclosure, separate from the two LED modules, to allow maximum airflow.
Multiple spectrum recipes
The TriPlane Linear is available in RWMB, Daylight, and far-red-enhanced (RWMB_FR) recipes, plus a dual-channel RWMB+FR option, each offered in high-output (HO) and low-output (LO) modules.
Each spectral recipe is tuned for a different application, from broad-spectrum sole-source Daylight to high-efficiency red-and-blue RWMB. See the output table below for the power, efficacy, and photon flux of each.
Linear mounting options
The TriPlane Linear supports a range of mounting hardware so your installer can fit it to your structure. Linear configurations position the driver vertically or horizontally, above or between the LED modules.
SQ mounting options
SQ configurations use gravity overhang hooks, perpendicular brackets, or offset crop-wire mounts.
Output by recipe
Each spectral recipe is available in high-output (HO) and low-output (LO) modules. RWMB+FR is a dual-channel recipe.
| Recipe (output) | Power | Photon efficacy | Photon flux |
|---|---|---|---|
| RWMB+FR (HO) | 712.0W | 3.3 µmol/J | 2313 µmol/s |
| RWMB_FR (HO) | 705.1W | 3.1 µmol/J | 2209 µmol/s |
| RWMB (HO) | 670.8W | 3.3 µmol/J | 2084 µmol/s |
| Daylight (HO) | 641.1W | 2.6 µmol/J | 1651 µmol/s |
| RWMB_FR (LO) | 438.9W | 3.2 µmol/J | 1424 µmol/s |
| RWMB (LO) | 396.0W | 3.2 µmol/J | 1256 µmol/s |
| Daylight (LO) | 379.2W | 2.5 µmol/J | 964 µmol/s |
Measured 350 to 800 nm. RWMB+FR is a dual-channel recipe; its CSA and DLC listings are pending. Values accurate to plus or minus 10 percent.
TriPlane Linear technical specifications
Electrical
- Power
- 379W to 712W (by recipe and output)
- Rated main voltage
- 208 to 480V
- Amperage
- 0.74A to 3.42A (by recipe, output, and voltage)
- Power factor
- > 0.97
- Input frequency
- 50 / 60 Hz
- Light source
- LED
- Dimming
- 0-10V sourcing
- Wiring
- Power and 0-10V control are daisy-chain compatible
- Lifetime
- L90B5 at 50,000 hours
Values accurate to plus or minus 10 percent. The TriPlane Linear is a 0-10V sourcing supply, compatible with most major control systems that use 0-10V sinking protocols, including Hoogendoorn, Priva, Argus, and Wadsworth. Full per-recipe amperage is in the spec sheet. L90B5 at 50,000 hours means no more than 5 percent of luminaires are expected to fall below 90 percent PAR maintenance within 50,000 hours.
Environment, certification, and warranty
- Max ambient temperature
- 40 °C
- Optimal LED temperature
- 0 to 40 °C
- Installation
- Climate-controlled rooms
- IP rating
- IP66
- Certifications
- DLC Hort listed, CSA certified (RWMB+FR pending)
- Warranty
- Limited 5-year warranty from the date of invoice
TriPlane Linear dimensions
Overall dimensions for both the Linear and SQ mounting configurations are shown below. Full measurements are in the technical specifications and the spec sheet.
Linear configuration
- LED module
- 25.60 x 6.22 x 3.82 in (650 x 158 x 97 mm), 11.2 lb (5.1 kg)
- Driver module (208-400V)
- 13.30 in (338 mm) long, 3.55 in (90 mm) high, 6.8 lb (3.1 kg)
- Driver module (480V)
- 25.20 in (640 mm) long, 3.55 in (90 mm) high, 16.1 lb (7.3 kg)
The system is modular but not interchangeable: each LED module must be paired only with its matched ballast (LO or HO). Do not mix, swap, or cross-pair different output modules and ballasts. A mismatched combination can cause malfunction or permanent damage that is not covered by warranty.
SQ configuration
- Length (x)
- 26.14 in (664 mm)
- Width (y)
- 22.80 in (579 mm)
- Height (z)
- 3.81 in (96.7 mm)
- Weight
- 35 lb (15.8 kg)
Specification data and manuals
TriPlane Linear questions, answered
What makes the TriPlane Linear different?
It combines high light output and controlled distribution with the efficiency and thermal management of LED, in a modular design with multiple mounting configurations and spectrum recipes to fit any greenhouse or indoor room.
What mounting configurations are available?
The Linear configuration mounts LED modules back-to-back or spaced apart, with driver modules vertical or horizontal. The SQ configuration secures the LED modules on either side of the driver with a factory-installed plate for a one-step install.
What spectrum recipes are available?
RWMB, Daylight, and far-red-enhanced (RWMB_FR) recipes, plus a dual-channel RWMB+FR option, each in high-output (HO) and low-output (LO) modules. The output table lists the flux and efficacy of each.
Can I mix LED modules and ballasts?
No. The system is modular but not interchangeable. Each LED module must be paired only with its matched ballast (LO or HO). Do not mix, swap, or cross-pair different output modules and ballasts, a mismatched combination can cause malfunction or permanent damage that is not covered by warranty.
We engineer the plan before we quote the fixtures
Tell us your crop, structure, and targets. Your regional sales manager returns a photometric plan with fixture layout, connected load, and an energy estimate.