Cleaning Horticultural Luminaires
Unless you regularly measure your light levels, you may not realize that light output can be reduced to 10% due to dust and dirt buildup on a luminaire and/or reflector.
A buildup of dirt on the luminaires can also lead to overheating and reduced performance. Horticultural lights that are not properly cleaned and maintained can result in a loss of quality in your crop, possibly increase your crop cycle, and reduce overall yield. To maintain optimal performance, it’s highly recommended to include the cleaning of lamps and/or reflectors as part of your regular cyclical maintenance routine when cleaning other parts of your CEA facility.
The summer months, when the days are longer, are typically a great time for greenhouse growers to consider cleaning their grow lights, since they won’t need supplementary lighting in the greenhouse.
It’s also important to note that proper maintenance protocols are critical to ensuring optimal performance and longevity of all greenhouse equipment. When cleaning the ceiling/walls of your grow facility, luminaires should ideally be removed from the mounting structure. If that’s not possible, lights should be properly bagged to protect them from the ingress of any water/cleaning agents, just like this customer did.
To Clean Your LED Luminaires
- As is always the case before commencing any maintenance work, be sure to turn off and lock out the branch circuit. Ensure the luminaires are completely cooled.
- Use low-pressure compressed air to remove dust and/or debris between the heat fins on the driver housing and/or LED modules.
- Wipe the luminaire housing down with a dry or slightly damp cloth.
- To remove the limescale buildup on the LED lens, lightly dampen a clean, soft cloth with vinegar and water solution (1:100 ratio). Gently wipe down the lens.
- Allow the luminaire to dry completely before powering on again.
Cleaning Your Reflectors
To maintain the highest level of performance for your HIDs, it’s recommended that you also check and clean your reflectors every year as part of your regular maintenance routine.
P.L. Light Systems’ NXT family of HIDs is designed so the reflectors can easily be removed for cleaning (even when the lamp is installed). So, to clean the reflectors, it’s as easy as lifting them off the light(s) and washing them in the same simple vinegar and water solution (1:100 ratio) used for cleaning the lens of your LED(s). You can check out this short video for step-by-step instructions on how to do this.
Obviously, the aluminum material of the reflectors will start to degrade over time as part of normal wear and tear in a CEA environment. So, at some point, you will need to replace them if you want to maintain optimal PAR light output over the long term.
For Your Safety, When Cleaning Luminaires and/or Reflectors
- Always maintain the correct ratio and never add other chemicals to vinegar and water solution.
- Never clean the luminaire with corrosive cleaning agents, abrasives, or other aggressive liquids.
- Wearing hand and eye protection is advised.
- Any luminaire maintenance should always be performed in accordance with local and national building; electrical and/ or safety codes.
Frequently Asked Questions
How often should I clean my lighting (reflectors or lenses)?
To maintain the highest level of performance for your lighting, it’s recommended that you check and clean your reflectors or LED lenses every year as part of your regular maintenance routine. Include the cleaning of lamps, reflectors, and/or LED lenses as part of your regular cyclical maintenance routine when cleaning other parts of your CEA facility.
What should I use to clean my grow lights?
Use low-pressure compressed air to remove dust and/or debris between the heat fins on the driver housing and/or LED modules. To remove the limescale buildup on the LED lens, lightly dampen a clean, soft cloth with vinegar and water solution (1:100 ratio). Gently wipe down the lens.
To clean the reflectors, it’s as easy as lifting them off the light(s) and washing them in the same simple vinegar and water solution (1:100 ratio) used for cleaning the lens of your LED(s).
Never clean the luminaire with corrosive cleaning agents, abrasives, or other aggressive liquids.
What causes decreases in supplemental lighting performance?
Common issues that growers discover when performing regular lighting measurements include aging LEDs, burnt out HPS lamps, ballast degradation, dirty optics or reflectors, or electrical issues.
Do I have to replace my grow light reflectors, or can I clean them?
You can clean them. Some manufacturers will tell you reflectors need replacing every year or two. If they are good quality reflectors made from quality materials, that is not true. Dirt, dust and buildup on a reflector cut your light output, so check and clean them annually. Cleaning is as simple as removing the reflectors and washing them in a 1:100 vinegar and water solution. The reflectors in the P.L. Light Systems NXT family are designed to come out for cleaning even with the lamp installed. Aluminum does degrade with normal wear over the long term, so reflectors do eventually need replacing.
Tell us your crop, structure, and targets. We engineer the rest.
Victor Wiens is the Technical Sales Manager for Canada at P.L. Light Systems, where he handles technical service, technical sales consultation, and Canadian sales inquiries. As the former Senior Technical Lead at P.L. Light Systems, Victor combines his background in electronics and electrical engineering, gained in manufacturing environments, with a technical perspective on light planning and light audits. Working with customers’ data and goals, Victor takes a facts-based approach to help growers solve their horticultural lighting challenges, no matter the scale or application.